Linksys AG041 (EU) Network Router User Manual


 
13
Chapter 5: Configuring the ADSL Gateway
How to Access the Web-based Utility
ADSL Gateway with 4-Port Switch
Applications & Gaming
Single Port Forwarding. Use this screen to set up common services or applications on your network.
Port Range Forwarding. To set up public services or other specialized Internet applications on your network,
click this tab.
Port Triggering. To set up triggered ranges and forwarded ranges for Internet applications, click this tab.
DMZ. To allow one local user to be exposed to the Internet for use of special-purpose services, use this
screen.
Administration
Management. On this screen, alter Gateway access privileges, SNMP, and UPnP settings.
Reporting. If you want to view or save activity logs, click this tab.
Diagnostics. Use this screen to do a Ping Test.
Factory Defaults. If you want to restore the Gateway’s factory defaults, use this screen.
Firmware Upgrade. Click this tab if you want to upgrade the Gateway’s firmware.
Status
Gateway. This screen provides status information about the Gateway.
Local Network. This provides status information about the local network.
DSL Connection. This screen provides status information about the DSL connection.
How to Access the Web-based Utility
To access the web-based utility, launch Internet Explorer or Netscape Navigator, and enter the Gateway’s default
IP address, 192.168.1.1, in the Address field. Then press Enter.
A password request page will appear. (non-Windows XP users will see a similar screen.) Enter admin (the default
user name) in the User Name field, and enter admin (the default password) in the Password field. Then click the
OK button.
DMZ: removes the Router's firewall protection from one
PC, allowing it to be "seen" from the Internet
firmware:: the programming code that runs a networking device
ping:: an Internet utility used to determine
whether a particular IP address is online
SNMP: a widely used network
monitoring and control protocol
ipgrade:: to replace existing software or
firmware with a newer version