Filter
Top Products
10/100 Managed 24-Port GigaSwitch
Changing the Guest Password
1. Use the Down Arrow key to highlight guest Password and press the Enter
key. The Enter New Password screen will appear.
2. Enter a new guest password. If you make a mistake, use the Backspace
key to delete the error. The password is case-sensitive, can be no
more than 16 characters (only alphanumeric characters and the underscore
“_” character can be used).
3. Press Enter to return to the General screen.
Statistic Collection
1. From the General screen, highlight Statistic Collection and press the Enter
key. The following screen will appear.
2. Highlight one of the following choices:
Disabled (prevents statistic collection to the GigaSwitch)
Enabled (allows statistic collection to the GigaSwitch)
3. Press Enter to return to the General screen.
15
Linksys EtherFast
®
II Series
4. Enter the new password. For security, each password character you
type appears as an asterisk (*). The password is case-sensitive, can be no
more than 16 characters (only alphanumeric characters and the underscore
“_” character can be used).
5. Press Enter. A screen will prompt you to re-enter the new password.
6. Re-enter the new password you typed in step 4 and press Enter. The
Password Changed message will appear, confirming that the new password
is in effect.
7. Press Enter to remove the message and return to the General screen. The
admin password will appear as asterisks in the admin Password field.
14