Linksys EG24M Switch User Manual


 
10/100 Managed 24-Port GigaSwitch
5. After reviewing this information, press the Esc key until you return to
the desired screen.
IP Networking
If you select IP Networking from the Advanced Management screen, the IP
Networking screen will appear.
From the IP Networking screen, you can:
• View or change IP and RIP Settings.
• View or change ARP Table Parameters.
• View or change Routing Table Parameters.
• View or change DHCP Gateway Settings.
• View or change Ping Settings.
43
Linksys EtherFast
®
II Series
Per Port Statistics
If you select Per Port Statistics from the Port Perspective screen, a screen
similar to the following Per Port VLAN Activities will appear.
1. To reset counters for all ports, press the “R” key. When the following
screen appears, highlight Yes. Press Enter to reset the counters or high-
light No and press Enter to not reset them.
2. To view statistics for a port, use the Up Arrow and Down Arrow keys to
highlight the desired port.
3. Press the Enter key. A screen similar to the following will appear, showing
the statistics for the port you selected.
4. To reset counters for the port in the screen above, press the “R” key. The
following screen will appear (see next page).
42