Filter
Top Products
10/100 Managed 24-Port GigaSwitch
2. Highlight one of the following choices:
Disabled (prevents remote Telnet logins to the GigaSwitch)
Enabled (allows remote Telnet logins to the GigaSwitch. This is the
default setting)
3. Press Enter to return to the General screen.
Returning to the Basic Management Screen
After completing the general management activities, press the Esc key to exit
the General screen and return to the Basic Management screen. You can then
select another option from the Basic Management screen or press Esc to
return to the Switch Management screen.
LAN Port Configuration
Select LAN Port from the Basic Management screen. The LAN Port
Configurations screen will appear, with Speed & Flow Control highlighted.
Use the procedures in this section to configure the LAN Port Configuration
options for one or more ports, including:
• Speed & Flow Control
• Physical Address (this option only appears when System MAC Address in the
General screen is set to Multiple)
17
Linksys EtherFast
®
II Series
Reboot-on-Error
1. From the General screen, highlight Reboot-On-Error and press the Enter
key. The following screen will appear.
2. Highlight one of the following choices:
Disabled (prevents the GigaSwitch from automatically resetting
when a fatal error is detected. This setting is useful when a
persistent problem needs to be reported)
Enabled (allows the GigaSwitch to automatically reset when a fatal
error is detected)
3. Press Enter to return to the General screen.
Remote Telnet Login
1. From the General screen, highlight Remote Telnet Login and press the
Enter key. The following screen will appear.
16