Filter
Top Products
24
Chapter 6: Configuring the Wireless-G Broadband Router
The Wireless Tab - Wireless Network Access
Wireless-G Broadband Router
The Wireless Tab - Wireless Network Access
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your
network’s radius.
MAC Filter. To filter wireless users by MAC Address, either permitting or blocking access, click Enable. If you do
not wish to filter users by MAC Address, select Disable.
Deny. Clicking this button will block the wireless access by MAC Address.
Allow. Clicking this button will allow the wireless access by MAC Address.
Select MAC Address from Networked Computers. Clicking this button will open the Wireless Client MAC List.
On this screen, you can view users, by MAC Address, to whom you wish to provide or block access.
Change these settings as described here and click the Save Settings button to apply your changes or Cancel
Changes to cancel your changes.
Figure 6-22: Wireless Client MAC List
Figure 6-21: Wireless Tab - Wireless Network Access