Filter
Top Products
9
Chapter 4: Software Installation and Configuration
The Installation Procedure
Wireless-G Notebook Adapter
4. If you chose Infrastructure Mode, go to Step 5 now. If you chose Ad-Hoc Mode, select the correct
operating channel for your network. Then, select the Network Mode from the drop-down menu. Click the
Next button, and go to Step 5. Click the Back button to change any settings.
Channel - The channel you choose should match the channel set on the other devices in your wireless
network. If you are unsure about which channel to use, select the default channel.
Network Mode - Select Mixed Mode, and both Wireless-G and Wireless-B computers will be allowed on the
network, but the speed will be reduced. Select G-Only Mode for maximum speed, but no Wireless-B users
will be allowed on the network.
5. The Setup Wizard will ask you to review your settings before it starts to copy files. Click the Next button to
save these settings, or click the Back button to change any settings.
If you’re using Windows 2000, you may see a Windows Digital Signature warning. As this product has been
tested to work with Windows, you may continue.
Figure 4-4: The Setup Wizard’s Wireless Channels screen
Figure 4-5: The Setup Wizard’s Finalize Settings screen