Filter
Top Products
6
Chapter 3: Getting to Know the Router
The Back Panel
Wireless-G Broadband Router with 2 Phone Ports
Chapter 3: Getting to Know the Router
The Back Panel
The Router’s ports and the Reset button are located on the back panel of the Router.
Internet This Internet port connects to your cable or DSL modem.
Phone1 For your primary Internet phone line, the Phone1 port allows you to connect the Router to your
telephone (or fax machine) using an RJ-11 telephone cable (not included).
Phone2 If you have a second Internet phone line, the Phone2 port allows you to connect the Router to
your second telephone (or fax machine) using an RJ-11 telephone cable (not included).
Ethernet 1-4 These four Ethernet ports connect to network devices, such as PCs, print servers, or
additional switches.
Reset Button There are two ways to reset the Router to its factory default settings. Either press the Reset
button for approximately five seconds, or restore the defaults from the Administration tab -
Factory Defaults of the Router's Web-based Utility.
Power The Power port is where you will connect the power adapter.
Figure 3-1: Back Panel
IMPORTANT: If you reset the Router, all of
your settings, including Internet connection,
Internet phone service, and security settings,
will be deleted and replaced with the factory
defaults. Do not reset the Router if you want to
retain these settings.
(If you have an active Internet phone service
account and reset the Router, then the Router
will automatically download its Internet phone
service settings once it is connected to the
Internet again.)