Filter
Top Products
20 INSTALLERS MANUAL | Copyright © 2006 Digimerge Technologies Inc.
Starting the DVR - Self Test Screens
SECTION 4
Starting the DVR - Self Test Screens
Once the DVR has been connected and powered on, the following self-test screens will appear:
NOTE: If a new HARD DRIVE is detected by the system, the DVR will automatically FORMAT
the new drive.
Starting the DVR -
QUAD Display
After the system self-tests have
been completed, the DVR will
switch to the CAMERA viewing
screens (in QUAD MODE) with the
following information displayed on
screen:
• CH1-CH4: Camera title
indicators
• HDD%: Percentage of Hard
Drive used
• MM/DD/YYYY - HH:MM:SS:
The current system date and
time.
If a camera is not detected, or the Camera is in COVERT MODE, the associated portion of the
QUAD or MULTI screen will display a BLUE SCREEN.
Powering Off the DVR/Stopping Recording
In order to power down the DVR Unit, or to manually stop the current recording, the default
system password of ‘00000000’ will need to be entered (when prompted). If the default password
is changed, then the new user specified password will be used instead.
DIGIMERGE LOADING PROGRAMS ......