Filter
Top Products
34 INSTALLERS MANUAL | Copyright © 2006 Digimerge Technologies Inc.
System Set
SECTION 4
System Set
Basic
Settings for General Parameters.
1. LANGUAGE: Displays the current default language on the DVR (English or Dutch).
2. INITIALIZATION: Resets all settings to Factory Default. To change the setting, press the
K and
L buttons to highlight, and press the SEL button. A message will appear prompting for User input:
All setup will be returned to Factory Default
• Press the Select key to continue
• Press the Menu key to exit
3. DATE FORMAT: Configuration for the date display on the DVR. Press the
K and L buttons to
highlight, and press the IJ to change the date format:
• MM-DD-YYYY
• DD-MM-YYYY
• YYYY-MM-DD
4. DATE/TIME/DST SET: Sets the Date and Time for the unit. Press the
K and L buttons to
highlight, and press the SEL key to enter the configuration. Press the KLIJ buttons to change
the date format. Daylight Savings can be set from this menu to run between set days.
5. INFORMATION: Displays System Information:
6. SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
K and L buttons
to highlight, and press the SEL button to accept the changes.
HDD Capacity:
FPGA Version:
Application:
RAMDisk Version:
Kernel Version:
IP Address:
MAC Address
## GB / ## GB
############
############
############
############
###.###.###.###
##:##:##:##:##:##
Basic
Language
Initialization
Date Format
Date/Time/DST Set
Information
Save & Exit
English
MM-DD-YYYY
DATE/TIME 01-01-2006
20:21:28
DST: OFF
START: MAR 2 SUN 02:00
END: NOV 1 SUN 02:00
OFFSET: 01:00