Filter
Top Products
42 INSTALLERS MANUAL | Copyright © 2006 Digimerge Technologies Inc.
Event Notification
SECTION 4
Notification Out
Configuration settings for Notifications.
1. EMAIL: Specifies an event type to be sent as an automatically generated email. Press the
K
and L buttons to highlight, and press the SEL key to enter the Email submenu:
• VIDEO LOSS: Sets the Video Loss Event send to ON/OFF
• ALARM: Sets the Alarm Event send to ON/OFF
• MOTION: Sets the Motion Event send to ON/OFF
• POWER LOSS: Sets the Power Loss Event send to ON/OFF
• SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
K and L
buttons to highlight, and press the SEL button to accept the changes.
2. BEEP: Turns the audible alerts ON/OFF when an event is detected. Press the
K and L buttons
to highlight, and press the SEL key to enter the Beep submenu. Options within this menu are
the same as the EMAIL SUBMENU above.
3. ALARM OUT: Turns the alarm out to ON or OFF when an event is detected. Press the
K and
L buttons to highlight, and press the SEL key to enter the Alarm out submenu. Options within
this menu are the same as the EMAIL SUBMENU above.
4. DURATION: Specifies the length of time for an event. Press the
K and L buttons to highlight,
and press the IJ buttons to change the duration to 5 seconds, 10 seconds or 20 seconds.
Notification Out
Email
Beep
Alarm Out
Duration
5 Sec.
Video Loss
Alarm
Motion
Power Loss
Save & Exit
OFF
ON
ON
OFF