Filter
Top Products
Revision 1.0 39
Network Set
SECTION 4
IP Set
The options in the IP Set menu control the local network setup for the Unit. See 45 for additional
network setup instructions.
• DHCP: Press the
K and L buttons to highlight,
and press the
←→ buttons to set to NO/YES.
Set this option to YES to allow the unit to get
Network information from the Router; set this
option to NO if information will be manually
assigned to the DVR unit.
• IP ADDRESS: Press the
K and L buttons to
highlight, and press the SEL button to enter
setup. Use the Numbers on the front panel of
the DVR to set the IP address.
• GATEWAY: Press the
K and L buttons to
highlight, and press the SEL button to set to
enter setup. Use the Numbers on the front panel
of the DVR to set the Gateway address.
• NETMASK: Press the
K and L buttons to highlight, and press the SEL button to set to enter
setup. Use the Numbers on the front panel of the DVR to set the Net Mask.
• DNS SERVER: Press the
K and L buttons to highlight, and press the SEL button to enter
setup. Use the Numbers on the front panel of the DVR to set the DNS Server address.
• DVR PORT: Press the
K and L buttons to highlight, and press the SEL button to enter setup.
Use the Numbers on the front panel of the DVR to set the DVR Port to 2000.
• WEBSERVER PORT: Press the
K and L buttons to highlight, and press the SEL button to
enter setup. Use the Numbers on the front panel of the DVR to set the Webserver Port to 0080.
• SAVE & EXIT: Saves any changes made, and exits to the Main Menu. Press the
K and L
buttons to highlight, and press the SEL button to accept the changes.
DHCP:
IP Address:
Gateway:
Netmask:
DNS Server:
DVR Port:
Webserver Port:
Save & Exit
NO
###.###.###.###
###.###.###.###
###.###.###.###
###.###.###.###
2000
0080