Filter
Top Products
Index-2 SP Switch Router Adapter Guide - 1.4 Update 2
Index
D
control board, SP Switch Router
using ping command, 2-36
csconfig command, 2-9, 3-2
D
data buffer size, 1-13
data collection utility, grdinfo, 3-25
data link layer (layer 2) stats, 3-14
data transfer rate, 1-13
default gateway, C-2
dependent node, 1-3
assigning switch connection to, 2-12
MIB support, 1-15
role of SP Switch Router Adapter, 2-2
dev1
filter media type name, 1-14
in CLI profiles, 2-24
in grcard media card status, 2-37
in Load profile, 2-27
in log and dump output, 2-36, 3-30
references to, 2-37
dev1config command
how to run, 2-31
SP Switch Router Adapter card start up,
2-31
when to use, 2-17
diagnosticFailed state, 1-16
diagnostics
during boot, 1-18
discard UDP packets, how to configure, 3-19
discovery facility, MTU, 2-23
disk, PCMCIA spinning, 1-4
dropping UDP packets, 3-19
dump profile
change dump defaults, 2-28
dump vectors, in Dump profile, 2-29
DUMPING, state of, 2-37
dumps
change settings in Card profile, 2-25
change settings in Dump profile, 2-28
changing defaults for, 2-16
collecting via grdinfo, 3-25
from media cards (grdump,n.x.gz), 3-24
from SP Switch Router system
(bsdx.core), 3-24
grreset option for, 3-4
panic dumps saved, 2-7
useful for debugging, 3-24
dynamic routing, memory needed, 1-5
E
Eannotator command, 2-12
empty slots, need face plate covers, 1-7
error messages
explanations of messages, see Appendix B
in messages log, 3-33
switch receive error, 3-23
switch route not found, 3-21
errors during boot, 1-9
ESD requirements, when handling cards, 1-8
Estart an SP Switch Router Adapter card,
2-41
/etc/fstab
how to edit for logging, 2-7
/etc/grclean.conf, 2-8
/etc/grclean.logs.conf, 2-8
/etc/grdev1.conf, 2-16, 2-17
definitions of SNMP variables, 2-33
editing, 2-31, 2-32
MIB updates, 1-15
/etc/grifconfig.conf, 2-16
assigning interfaces (option), 2-21
format for entries, 2-21
making entries permanent, 2-23
/etc/grroute.conf, 3-7
/etc/snmpd.conf, 2-16
editing, 2-18
/etc/syslog.conf
editing for logging, 2-8
/etc/ttys, telnet access, 2-3
Ethernet cable
attaching, 2-10
required for SP Switch Router, 1-4
Ethernet connection, 2-5, 2-10
checking via ping, 2-41
Ethernet hub connection, 1-2
Eunfence an SP Switch Router Adapter card,
2-41
examples, SP Switch networks
see Appendix C
extension node
and SP SNMP Manager, 2-21
role of SP Switch Router Adapter, 2-21
Extension Node Identifier (MIB parameter),
2-33