Filter
Top Products
Impulse DataLogger Series 3 Instruction Manual
2/1/05
2 of 16
Section 1: Overview
The DataLogger Series 3 was
designed to simplify troubleshooting
and provide for detailed operational
histories that are necessary for
genuine preventive maintenance.
The DataLogger is a nonvolatile
solid state (flash memory) recording
device that allows the operator to
easily and logically access the
Run, Alarm & Fault histories
of the IMPULSE•G+/VG+ Series 2
and IMPULSE•G+/VG+ Series 3
drives. It will also store 5 parameter
sets. The DataLogger was
designed to be a fit and form
replacement to the Series 3 keypad.
An additional cable is required
for use with Series 2 drives.
The DataLogger System consists of
three (3) components:
the DataLogger, the USB cable
for PC communication and
DataPulse™ Series 3 software.
The DataLogger was designed to include sufficient memory to log the last 1400
Run Events, the last 200 Alarm Events and the last 200 Fault Events. In addition
to the Alarm and Fault history, a Trace function is provided for viewing drive data
that lead to the Alarm/ Fault condition. The user-friendly DataLogger can be
effectively applied by those with little or no knowledge of inverters. All data
acquisition is automatic, and data viewing and analysis is available via the LCD
display or by uploading and viewing on your PC. The logger is powered by the
inverters 5 VDC internal supply when logging or by the USB when connected to
the PC. The internal clock is powered by a replaceable Lithium coin type battery.