Filter
Top Products
User Manual version 2503
LIBRA 120 III (PC620 Intel 815E)
6-119
3. Wake up Packet
To use the AMD’s Magic Packet, program installation is not
needed. Just open the MAGPAC.EXE, then the following screen
will pop up.
The remote computer can be waken up by selecting the MAGIC
PACKETS
＼
POWER ON ONE HOST as shown below.
Do not change the IP BROADCAST ADDRESS. The DESTINATION
ETHERNET ADDRESS is to be filled in with the Ethernet card’s
MAC address.
PDF created with pdfFactory trial version www.pdffactory.com