Filter
Top Products
User Manual version 2503
LIBRA 120 III (PC620 Intel 815E)
3-39
3.2.4. Media Reader/CD-ROM Module Assembly
Refer to Fig. 3-7. The following steps show the ways to install
a media reader/CD-ROM module before it is integrated to the
panel PC.
1. Insert the media reader (B) to the media reader/CD-ROM
bracket and fix them together with four TMS 3*6 screws.
2. Attach the CD-ROM board to the slim CD-ROM drive (C)
and fix them together with 2 screws.
4. There is a small metal bracket (D) used to firmly fix the
CD-ROM drive to the bracket. Retain the small bracket to
the CD-ROM drive first with two IMS M2*2.25 screws.
This small bracket is to prevent the CD-ROM drive from
moving when installed to the device bracket.
5. Insert the CD-ROM module with a small bracket on to the
media reader/CD-ROM bracket (A) and fix them together
with two IMS M2*2.25 screws and two PMS M3*5 screws.
FIGURE 3-13.MEDIA READER/CD-ROM MODULE ASSEMBLY
PDF created with pdfFactory trial version www.pdffactory.com