Filter
Top Products
Getting Started with Base Only Systems 8 000001630
MaxAttach NAS 6000 Getting Started
Getting Started with Base Only Systems
9: Power Up Your Maxtor MaxAttach NAS 6000
10/16/01 -- Revision 2.0.03
n Green System Status LEDs: When fully booted, the system power-on
(middle) LED will be green.
n Blue System Error Status LED: The blue upper system status and the lower
drive status LEDs should be dark.
n Green Drive Activity LEDs: The green disk drive activity LEDs will indicate
when the system has reached a steady status.
n Amber Drive Unavailable LEDs: The amber disk drive unavailable LEDS
should be off.
n Green Power Supply LEDs: Each power supply has a green LED on the left
for correct DC voltage status and another green LED on the right for correct
AC voltage status.
4. The Status LCD panel will show normal system operation for system starting, disk
normal, and local area network normal.
5. When activity stops, the system has completely booted.
6. Go to your client administrative workstation.