Filter
Top Products
PCI-2513 User's Guide Specifications
29
Trigger sources and modes
Table 6. Trigger sources and modes
Input scan
trigger sources
Single channel analog hardware trigger
Single channel analog software trigger
External-single channel digital trigger (TTL TRG input)
Digital pattern trigger
Counter/totalizer trigger
Single channel analog hardware trigger: The first analog input channel in the scan is the analog trigger
channel.
Input signal range: -10 V to +10 V maximum
Trigger level: Programmable (12-bit resolution)
Latency: 350 ns typical
Accuracy: ±0.5% of reading, ±2 mV offset maximum
Noise: 2 mV RMS typical
Single channel analog software trigger: The first analog input channel in the scan is the analog trigger
channel.
Input signal range: Anywhere within range of the trigger channel
Trigger level: Programmable (16-bit resolution)
Latency: One scan period (maximum)
External-single channel digital trigger (TTL trigger input):
Input signal range: -15 V to +15 V maximum
Trigger level: TTL-level sensitive
Minimum pulse width: 50 ns high, 50 ns low
Latency: One scan period maximum
Digital pattern triggering: 8-bit or 16-bit pattern triggering on any of the digital ports. Programmable for
trigger on equal, not equal, above, or below a value. Individual bits can be masked for "don’t care"
condition.
Latency: One scan period, max
Input scan
triggering
modes
Counter/totalizer triggering: Counter/totalizer inputs can trigger an acquisition. User can select to
trigger on a frequency or on total counts that are equal, not equal, above, or below a value, or
within/outside of a window rising/falling edge.
Latency: One scan period, maximum
Frequency/pulse generators
Table 7. Frequency/pulse generator specifications
Channels 2 x 16-bit
Output waveform Square wave
Output rate 1 MHz base rate divided by 1 to 65535 (programmable)
High-level output voltage 2.0 V minimum @ -1.0 mA, 2.9 V minimum @ -400 µA
Low-level output voltage 0.4 V maximum @ 400 µA
Power consumption
Table 8. Power consumption specifications
Power consumption (per board) 3 W
PCI compatibility
Table 9. PCI compatibility specifications
PCI bus PCI r2.2 compliant, universal 3.3 V/5 V signaling support, compatible with PCI-X