Definitions
2-11
Assigning cards
-
Procedure 2-1
Order for assigning cards
1
Assign cards requiring a card slot 1 assignment (high priority slot).
2 Assign cards for high-usage trunks, such as CO trunks.
3 Assign cards for low-usage trunks, such as paging and dictation.
4 Assign cards for attendant consoles.
Note:
For the.PE UEM (NT8D13AA/DC), card slot 1 is reserved for
high priority signaling. For the IPE UEM (NT8D37AA/DC), both card
slots 0 and 1 are reserved for high priority signaling.
5
Assign Digitone receiver cards.
6 Assign cards for sets associated with multiple appearance groups.
7 Assign remaining cards. On a system which has a high density of
Digitone
sets, assign the least number of
SO0
line cards to loops which
have Digitone receivers assigned.
Note:
Loops and Conference/Tone and Digit Switch Cards
(Conf/TDS) should be evenly distributed across Network UEMs and
groups.
8 Calculate the total load per UEM.
9 Calculate the total load per loop.
10 If required, rearrange card assignments to balance the load.
System engineering 553-3001-151