156 Memory calculations
Note 28 : Protected data store requirements for ATM schedule block are as
follows:
Releases
4,s
and 7:
24+((9xNC+l)xNH)
Releases S-15:
24+((9xNC+
l)xNH)+
13xAR
where:
NC = Number of Customers.
NH = Number of hours to be scheduled.
AR = Number of routes to be tested.
.
.
Note 29 : For all machine types, the additional protected data store for a
virtual terminal (DS access TN or VMS access TN) is exactly the same as
for an SL-1 set, with one exception. For any of the two TN types, the Card
Block Component is dependent on the shelf/card to which the terminal is
assigned. The component is 0 if the TN is on a preallocated card, or 1.5
words otherwise. A preallocated card may be one of the following
shelf/cards: O/l
-
O/7,
l/l
-
1/8,2/l
-
2/8 or 3/8 on a DLI loop. See Note 18.
Memory calculations 553-2201-151 Appendix 1
I
Y