Filter
Top Products
Configuring the Microsoft Internet Authentication
Service
You need to configure the IAS server to work together with the ISA Server 2004 firewall
computer so that they can communicate properly. At this time, we will configure the IAS
Server to work with the ISA Server 2004 firewall. Later we will configure the firewall to
communicate with the IAS server.
Perform the following steps on the domain controller on the internal network to configure the
IAS server:
1. Click Start and point to Administrative Tools. Click Internet Authentication Service.
2. In the Internet Authentication Service console, expand the Internet Authentication
Service (Local) node. Right click on the RADIUS Clients node and click New RADIUS
Client.
3. On the Name and Address page of the New RADIUS Client wizard, enter a friendly
name for the ISA Server 2004 firewall computer in the Friendly name text box. This
name is used to identify the RADIUS client and not used for operational purposes. Enter
the fully qualified domain name of the ISA Server 2004 firewall computer in the Client
address (IP or DNS) text box.
ISA Server 2004 Configuration Guide 25