Milan Technology MIL-SM2401MAF Switch User Manual


 
96
exchanging information between Partner Systems on a link to allow their Link Aggregation
Control instances to reach agreement on the identity of the Link Aggregation Group to
which the link belongs, move the link to that Link Aggregation Group, and enable its
transmission and reception functions in an orderly manner. Link aggregation lets you
group up to eight consecutive ports into a single dedicated connection. This feature can
expand bandwidth to a device on the network. LACP operation requires full-duplex
mode, more detail information refers to IEEE 802.3ad. You can configure and view all the
LACP status.
LACP Configuration interface
Working Ports Setting
1. Select <Edit>
2. Group: Display the trunk group ID.
3. Working Port Num: The max number of ports can be aggregated at the same time. If
LACP static trunk group, the exceed ports is standby and able to aggregate if work
ports fail. If it is local static trunk group, the number must be the same as group ports.
4. Select <Apply>