Filter
Top Products
70
System log Client Configuration Interface
Port Configuration
You can set up every port status.
1. Select <Edit>
2. Use “Tab/Backspace” key to move between items.
3. Type: display port connection speed.
4. State: Current port status. The port can be set to disable or enable mode. If the port
setting is disable then will not receive or transmit any packet.
5. Negotiation: set auto negotiation function of port.
6. Speed/Duplex: set the port link speed and duplex mode.
7. FC: enable or disable Flow control function (Flow control for full duplex link mode).
8. BP: enable or disable Back Pressure function (Backpressure for half duplex mode).
9. Bandwidth In/ Out: per port packet transmission rate control. Per level is 100Kbps. It
supports individual control method of TX and RX.
10. Priority: set packet of port to high or low priority queue.
11. Security: enable or disable port security function.
12. Select the <Apply>.