Filter
Top Products
101
802.1x Setup interface
System Configuration
After enabling the IEEE 802.1X function, you can configure the parameters of this
function.
1. Select <Edit>
2. Radius Server IP: set the Radius Server IP address.
3. Shared Key: set an encryption key for using during authentication sessions with the
specified radius server. This key must match the encryption key used on the Radius
Server.
4. NAS, Identifier: set the identifier for the radius client.
5. Server Port: set the UDP destination port for authentication requests to the specified
Radius Server.
6. Accounting Port: set the UDP destination port for accounting requests to the
specified Radius Server.
7. Select <Apply>