Filter
Top Products
111
[3]. Set Port PwrLimitClass.
(ON/OFF)
Enabling or disabling per port power output
limit. When is enabling, per port power
output limit will follow the value that set in
power limit max.
[4] Set Port PwrLimitManag.
(ON/OFF)
Enabling or disabling the port power limit
management for power supply
management.
[5] Set Port DetectLegacy Enabling the port power legacy detect.
[6] Set Port Priority (1:C 2:H 3:L)
Set port priority for the power supply
management.
[7] Set Power Limit Max (<15400)
Set the port power output limit value. The
maximum value must less than 15400.
[a] Auto Refresh [OFF]
Enabling or disabling auto refresh system
parameters.
[t] Set Total Power Limit
Set the total port power limit. When the
Power Management is enabling, this
function will show up.
[n] Next Page Switch to next page
[0] Exit Exit POE Menu mode
Save Configuration
You must save the configuration to the flash memory when you have changed the
configuration. Otherwise, the new configuration will be lost when the switch restart or
power off.