Filter
Top Products
9
Troubleshooting
9-14
Blank spots on the
print-out, text
missing
The paper is moist because of
high humidity in the air or from
being splashed with water.
Print the job again on dry paper.
White or black lines
on the print-out
The imaging cartridge is
damaged.
Remove the imaging cartridge
and check it for damage. If
necessary, fit a new cartridge
(see page 8-5).
Toner smudges on
the print-out
The imaging cartridge is
damaged.
Remove the imaging cartridge
and check it for damage. If
necessary, replace it with a new
cartridge (see page 8-5).
Insufficent toner in the cartridge. Lift out the imaging cartridge and
shake it in order to improve the
distribution of the remaining
toner. If the problem persists, fit
a new cartridge (see page 8-5).
The paper feed roller is dirty. Clean the paper feed roller (see
page 8-2). If the problems
persists, contact
MINOLTA-QMS Support.
Problem Possible cause Action