Filter
Top Products
EN-14
Viewing video images (continued)
Connecting to video equipment having a DVI-D terminal
You can project high-quality images by connecting the DVI terminal of this projector to video equipment having a
DVI-D output terminal. In addition, this projector supports HDCP and is able to receive encrypted digital video
data that are output from DVD players.
• For connection to the DVI-D terminal, use a commercially available DVI cable.
• Select DVI as the input source.
• Only RGB signals are supported. Component video signals are not supported.
• HDCP (High-bandwidth Digital Content Protection), developed by Intel Corporation, is a method to encrypt
digital video data for the purpose of copy protection.
• This projector uses stereo mini plug for its audio input.
• When DVI is selected as the input source, setting of COLOR, TINT, FINE SYNC., TRACKING and HOLD is
unavailable.
When you connect this projector and a DVI-Digital device (such as a DVD player) via the DVI
terminal, black color may appear light and pale, depending on the type of the connected device.
• This depends on the black level setting of the connected device. There are two kinds of methods to digitally
transfer image data, in which different black level settings are employed respectively. Therefore, the specifica-
tions of the signals output from DVD players differ, depending on the type of the digital data transfer method
they use.
• Some DVD players are provided with a function to switch the methods to output DVI-Digital signals. When
your DVD player is provided with such function, set it as follows.
NORMAL ➔ EXPAND or ENHANCED
• See the users guide of your DVD player for details.
• When your DVD player does not have such function, set BRIGHTNESS of this projector to -16.
B. Plugging in the power cord
1 Plug the attached power cord into the power cord inlet of
this projector.
2 Plug the other end of the power cord into a power outlet.
• The power cords for use in the U.S. and Europe are included with this projector. Use the appropriate one for
your country.
• This projector uses the power plug of three-pin grounding type. Do not take away the grounding pin from the
power plug. If the power plug doesn’t fit your wall outlet, ask an electrician to change the wall outlet.
• The provided power cord for the U.S. is rated at 120 V. Never connect this cord to any outlet or power supply
using other voltages or frequencies than rated. If you use a power supply using other voltage than rated,
prepare an appropriate power cord separately.
2
1
Equipment having a
DVI-D terminal
To audio output
terminals
Audio cable (Option)
To audio input
terminals
To DVI-D terminal
DVI cable (Option) To DVI-D (HDCP) terminal
Earthing
terminal
Power cord
(Example)