Filter
Top Products
EN-22
CONTRAST
IMAGE
0
BRIGHTNESS 0
6200K
0
COLOR
AUTO
0
SVGA60
OFF
AUTO
TINT
0SHARPNESS
COLOR TEMP.
GAMMA MODE
sRGB
CineRichColor
opt.
IMAGE REVERSE
OFF
AUTO POWER
ON
OFF
AUTO POWER
OFF
KEYSTONE
ON
INSTALLATION
ON
BACK COLOR
OFF
BLUE
SVGA60
SPLASH SCREEN
0
opt.
STANDARDLAMP MODE
FEATURE
AUTO
SVGA60
AUTO
AUTO
opt.
MENU POSITION
CINEMA MODE
VIDEO SIGNAL
?
ASPECT
RESET ALL
English
LANGUAGE
A
Ë
OK
MENU
ACCESS
PASSWORD
FUNCTION
1.
R G B
R G B
SIGNAL
HORIZ. POSITION 0
VERT. POSITION 0
TRACKING 0
COMPUTER
INPUT
RGB
SET UP
AUTO
FINE SYNC. 0
USER
SVGA60
opt.
OK
ON
HOLD
Menu operation (continued)
Available settings in the menus
Set the following items on their relevant menus.
1. IMAGE menu 2.INSTALLATION menu 3. FEATURE menu 4.SIGNAL menu
1. IMAGE menu
ITEM SETTING FUNCTION
CONTRAST 0 - 60 Use to adjust the contrast of the projected image. (See Page 24.)
BRIGHTNESS ±30 Use to adjust the brightness of the projected image. (See Page 24.)
CineRichColor AUTO / 0 - 10 Use to adjust the white level of the projected image. Select AUTO for
normal use. (See Page 24.)
sRGB ON / OFF Select whether or not to project emphasizing on the color reproducibility.
COLOR TEMP.
4 positions Use to adjust the color temperature. (See Page 25.)
COLOR 0 - 20 Use to adjust the color thickness of the projected image. (See Page 24.)
TINT ±10 Use to adjust the color tint of the projected image. (See Page 24.)
SHARPNESS 0 - 10 Use to adjust the sharpness of the projected image. (See Page 24.)
GAMMA MODE AUTO The appropriate gamma mode is automatically selected depending on the
input signal. Select AUTO for normal use.
STANDARD Select to secure the contrast even when the room lighting is increased to
some extent.
THEATER1 Select when watching movies in dim lighting as in a theater.
THEATER2 Select to gain the halftone to make the skin color more vibrant even in a
dark scene. This mode is suitable for TV viewing.
2. INSTALLATION menu
ITEM SETTING FUNCTION
KEYSTONE ±20 Use to correct vertical keystone distortion.
AUTO POWR ON ON / OFF
When ON is chosen, the lamp is automatically lit when the power cord is
plugged in the wall outlet. Choose ON when using the projector mounted on
the ceiling.
• The projector is in the stand-by mode when the lamp is off. Use the
remote control to turn on the lamp.
AUTO POWER OFF OFF / 5 - 60min
Use to set the time elapsed before the projector enters the stand-by mode
when there is no signal input from the source.
SPLASH SCREEN
ON / OFF Choose ON to display the splash screen when the power is turned on.
BACK COLOR BLUE / BLACK
Use to change the color of the screen that appears when no signal is
supplied.
LAMP MODE STANDARD Select this option in normal use.
LOW Select to moderate the intensity of the lamp. The operating sound is
reduced and the lamp lifetime becomes longer.
• Frequent switching of the lamp mode may damage the lamp.
IMAGE REVERSE
OFF Select when viewing images from the front with the projector installed on
the floor.
MIRROR Select when viewing images projected from the behind of the screen with
the projector installed on the floor.
INVERT Select when viewing images projected from the behind of the screen with
the projector installed on the ceiling.
MIRROR INVERT Select when viewing images from the front with the projector installed on
the ceiling.