Filter
Top Products
EN-21
ENGLISH
IMAGE CONTRAST 0 - 60
BRIGHTNESS ± 30
sRGB ON , OFF
CineRichColor AUTO, 0 - 10
9300K
6500K
5900K
USER
COLOR TEMP.
COLOR 0 - 20
TINT ± 10
SHARPNESS 0 - 10
GAMMA MODE AUTO, STANDARD, THEATER1, THEATER2
CONTRAST R 0 - 60
CONTRAST B 0 - 60
BRIGHTNESS R ± 30
BRIGHTNESS B ± 30
INSTALLATION
OFF, MIRROR, INVERT, MIRROR INVERT
KEYSTONE
± 20
AUTO POWER ON
ON , OFF
RESET ALL OK
AUTO POWER OFF
ON , OFF
FEATURE MENU POSITION 1 (Upper left), 2(Lower right)
IMAGE REVERSE
SPLASH SCREEN
BLUE, BLACKBACK COLOR
STANDARD, LOWLAMP MODE
AUTO, 4:3,16:9, EXPAND, REAL ASPECT
MENU ACCESS
PASSWORD FUNCTION
VIDEO SIGNAL AUTO , NTSC , PAL , SECAM , 4.43NTSC , PAL-M , PAL-N , PAL-60
LANGUAGE
, English, Español, Deutsch, Français, Italiano, , , ,
SIGNAL
HORIZ.POSITION
HOLD
0 - 999
VERT.POSITION 0 - 999
FINE SYNC. 0 - 31
TRACKING
USER
0 - 9999
CLAMP POSITION
0 - 63
CLAMP WIDTH 1 - 63
LPF
ON , OFF
*6
*8
*8
*7
*7
*3
*7
AUTO , OFFCINEMA MODE
*7
*9
*7
*6
*6
ON
BEGIN 0 - 99
END 0 - 99
OFF
COMPUTER INPUT
RGB, YC
B
C
R
/ YP
B
P
R
SET UP
OFF, 3.5%, 7.5%
*6
*6
OFF, 5, 10, 15, 30, 60 min
OK
ON
UNLOCK OK
LOCK
*1
*1
*1
*1 *2
*1
*4
*5
*2 *3
*6
Menu operation
• Menus are not displayed when no signal is supplied to the projector.
* 1: Not available when sRGB is set to ON.
* 2: Not available with certain signals.
* 3: Not available when the source is a COMPUTER.
* 4: Available only when the input signal is TV50, TV60, 480i, 576i.
* 5: Available only when the source is a VIDEO or S-VIDEO.
* 6: Setting range differs depending on the input signals.
* 7: Not available when the source is a VIDEO or S-VIDEO or DVI.
* 8: Not available when the source is a DVI from COMPUTER.
* 9: Available only when the input signal is 480i, 480p, 576i, 576p.
How to set the menus:
Following describe how to set AUTO POWER OFF
time as an example.
1. Press the MENU button.
• When no signal is input, the menu does not
appear.
2. Press the $ or % button to select a menu to use.
3. Press the ENTER button (or } button).
IMAGE
SVGA60
opt.
INSTALLATION
SVGA60
opt.
AUTO POWER
ON
OFF
KEYSTONE
INSTALLATION
SVGA60
0
opt.
4. Press the { or } button to select an item to
adjust.
5. Set the selected item by pressing the $ or %
button.
To cancel the menu:
6. Press the MENU button several times.
Important:
• When the MENU button doesn’t function,
unplug the power cord from the wall outlet. Wait
about 10 minutes, plug the power cord in, and try
again.
• After selecting the items marked with , press
the ENTER button.
OFF
AUTO POWER
ON
OFF
AUTO POWER
OFF
30 min
AUTO POWER
ON
OFF
AUTO POWER
OFF