Mitsubishi Electronics WD570U Projector User Manual


 
EN-41
Important:
• Virtual display function is only supported by
Windows XP.
• Toprojectavirtualextendedscreen,the
attached Virtual display driver must be
installed.
• HideUI
Hides or displays the main user interface.
• About
Displays the version information of the LAN
Display System.
• Exit
Exits the LAN Display System.
Ending the LAN Display projection
5. Click the Exit button on the main user interface or
the menu window to exit the LAN Display System.
6. In case of the wireless LAN communication,
unplug the USB memory from the projector. Before
unplugging, be sure to press the UNPLUG button
on the remote control and select [Yes] on the
screen by pressing the or button and then
ENTER button.
Using remote desktop
Connect an USB device such as a mouse or keyboard
to the USB-A terminal on the projector. While the
computer images are projected with the LAN Display,
the computer can be operated with the device.
To USB-A
terminal
One of the USB devices can be connected.
AUDIO OUT
AUDIO IN-3R
AC IN
VIDEO
MONITOR OUT
IN-2
USB-B
USB-ALAN
IN-1
COMPUTER / COMPONENT VIDEO
SERIAL
S-VIDEO
AUDIO IN-3L
AUDIO
IN-2
AUDIO
IN-1
Installing the virtual display driver
To project a virtual extended screen, install the Virtual
display driver as follows.
1. Double click “Virtual display driver.exe” contained
in the folder “LAN Display System”, and start up
the installer of the Virtual display driver.
2. The Setup window is displayed. Click [Next]
and operate according to the instructions on the
window.
3. When the installation has been completed, restart
the computer.
Important:
• DonotswitchtheinputsourcetoUSBDisplay
or PC Less Presentation during the wireless LAN
communication. If switched, the communication
will be disconnected.
• When the image is projected, the computer
resolution will be changed to WXGA/XGA according
to the projector model and will be automatically
recovered after unplugging the USB cable.
• DuringwirelessLANcommunication,theprojector
cannot communicate with the access point.
• Onlyinfrastructuremodeisavailabletowireless
LAN communication. Adhoc mode is not available.
Advanced display utilities (continued)