Mitsubishi Electronics WD570U Projector User Manual


  Open as PDF
of 60
 
EN-48
About PJLink™
• TousePJLink™function,thePJLink™
application software is required.
• Tousethisfunction,setthenetworkcertication
properly according to the setting of the network
application to be used. (See page 33.)
• ForthespecicationsofPJLink™,accessto
the Web site of Japan Business Machine and
Information System Industries Association
(JBMIA). (http://pjlink.jbmia.or.jp/english)
• Thisprojectorisfullycomplianttothe
specifications of JBMIA PJLink™ Class 1. It
supports all the commands defined by PJLink™
Class 1, and the compliance has been verified
with the PJLink™ standard specifications
Version 1.0.
Important:
• ForthecommandsforPJLink™,seethetableon
the next page.
• The control may not be performed correctly or the
monitoring data may not be obtained correctly in
the following conditions:
· During standby
· During input source switching
· During auto position execution
· During AV mute
· During command processing
· Before the splash screen disappears after the
power is turned on.
• During AV mute, etc., it may take approx. 5
seconds to receive a response to a command.
• Use 1 controller to control/monitor 1 projector.
• For how to control/monitor using PJLink™, see the
operation manual of the PJLink™ application you
use.
• Whenyoumonitortheprojector’soperatingstate
using this function by issuing inquiry commands
successively, issue an inquiry command after
receiving the response to the previous inquiry
command from the projector.
Supervising and controlling by computer
You can supervise and control the projector’s
operation using a personal computer via a LAN
network.
Major functions
ProjectorView Global+
Batch projector controlling / supervising application
software
• Batchoperationofstand-aloneprojector/multiple
projectors
• SchedulingfunctiontoturnON/OFFforeachdayof
the week
• Checkingeachconditionoftheprojectorand
detecting a theft
• Settingoftheprojector’sIPCong
• ActivatingVisualPA2todisplaythespecied
characters on the projector’s screen
• Projector’sTextSpeechfunctiontoreadaloud
messages displayed on the Visual PA2 window
AMX Device Discovery
The projector is monitored and controlled by the
controller system of AMX.
Crestron RoomView Connected™
The projector is monitored and controlled by the controller
system and software of Crestron Electronics, Inc.
PJLink™
This projector supports standard protocol PJLink™
for projector control and you can control and monitor
projector’s operations using the same application
among projectors of different models and different
manufacturers.
About ProjectorView Global+
• Fordetails,see“LANcontrolUTILITYoperation
manual” in the CD-ROM.
About AMX Device Discovery
• ThisisatechnologysuggestedbyAMXto
facilitate configuration of the control system of
AMX and its target devices.
For details, see the website of AMX.
URL http://www.amx.com/
About Crestron RoomView Connected™
• ThisisatechnologysuggestedbyCrestron
Electronics, Inc. to facilitate configuration of the
control system of Crestron and its target devices.
For details, see the website of Crestron
Electronics, Inc.
URL http://www.crestron.com
URL http://www.crestron.com/getroomview/
Advanced features (continued)
 previous next