Filter
Top Products
EN-42
Important:
• Virtual display function is only supported by
Windows XP.
• Toprojectavirtualextendedscreen,the
attached Virtual display driver must be
installed.
• Hide UI
Hides or displays the main user interface.
• About
Displays the version information of the LAN
Display System.
• Exit
Exits the LAN Display System.
Ending the LAN Display projection
5. Click the Exit button on the main user interface or
the menu window to exit the LAN Display System.
6. In case of the wireless LAN communication, unplug
the USB wireless LAN adapter from the projector.
Before unplugging, be sure to press the UNPLUG
button on the remote control and select [Yes] on
the screen by pressing the or button and then
ENTER button.
Using remote desktop
Connect an USB device such as a mouse or keyboard
to the USB-A terminal on the projector. While the
computer images are projected with the LAN Display,
the computer can be operated with the device.
To USB-A
terminal
One of the USB devices can be connected.
Installing the virtual display driver
To project a virtual extended screen, install the Virtual
display driver as follows.
1. Double click “Virtual display driver.exe” contained
in the folder “LAN Display System”, and start up
the installer of the Virtual display driver.
2. The Setup window is displayed. Click [Next]
and operate according to the instructions on the
window.
3. When the installation has been completed, restart
the computer.
Important:
• DonotswitchtheinputsourcetoUSBDisplay
or PC Less Presentation during the wireless LAN
communication. If switched, the communication
will be disconnected.
• When the image is projected, the computer
resolution will be changed to WXGA/XGA according
to the projector model and will be automatically
recovered after the LAN Display System is ended.
• DuringwirelessLANcommunication,theprojector
cannot communicate with the access point.
• Onlyinfrastructuremodeisavailabletowireless
LAN communication. Adhoc mode is not available.
Advanced display utilities (continued)