Filter
Top Products
CiM-550 IP Enabled Satellite Modem Rev. 2
Web Server Pages CD/CIM550.IOM
194
12.3.6.8 REDUNDANCY CONFIGURATION
Note: This page is not configurable unless the modem is properly connected to a Comtech EF
Data qualified Redundancy Switch. Refer to Section 11.2.6 CLI/Telnet Redundancy Configuration
for CRS-100/CiM-550 cabling information.
Table 12-10. Redudancy Configuration Fields
Field Description
Local Unit Management
IP Address/Mask
Read only field displays the CiM unit’s IP address and mask values.
Redundant Unit
Management IP
Address/Mask
Read only field displays the redundant unit’s IP address and mask
values.
Traffic IP Address/Mask Enter the traffic IP address and mask values. These values are
stored in the redundant modem’s memory and are used to address
the redundant modem’s CiM system.
Redundancy State Read only field indicates whether the redundant device is online or
offline.
Force Unit Offline Forces redundant unit offline.