Filter
Top Products
SLM-5650 Satellite Modem Revision 1
Remote Control MN/SLM5650.IOM
B–29
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Modem Alarm
Mask
MSK= 6 bytes Command or Query.
Alarm mask conditions, in the form abcdef, where:
a=spare ( must be set to 0 )
b=spare ( must be set to 0 )
c=spare ( must be set to 0 )
d=spare ( must be set to 0 )
e=spare ( must be set to 0 )
f=Eb/No Threshold Alarm ( 0 = unmasked, 1 = masked )
Example: MSK=000001
MSK=
MSK?
MSK*
MSK#
MSK? MSK=abcdef
(see description of
arguments)
Statistics
Sample
Interval
SSI= 1 byte Command or Query.
Used to set the sample interval for the Statistics Logging Function.
SSI=x, where x = 0 to 9 in 10 minute steps.
Note: Setting this parameter to 0 disables the statistics logging
function.
Example: SSI=3 sets the logging inverval to 30 minutes
SSI=
SSI?
SSI*
SSI#
SSI? SSI=x
(see description of
arguments)
Number of
Unread stored
Statistics
N/A 3 bytes Query only.
Unit returns the Number of stored Statistics, which remain Unread,
in the form xxx.
Note: This means unread over the remote control.
Example: NUS=126
N/A NUS? NUS=xxx
(see description of
arguments)
Initialize
Statistics
Pointer
ISP= None Command only.
Resets internal pointer to allow RNS? queries to start at the
beginning of the stored statistics log.
ISP=
ISP#
N/A N/A