Filter
Top Products
SLM-5650 Satellite Modem Revision 1
Remote Control MN/SLM5650.IOM
B–31
G.703 Interface Card Remote Control Commands.
The following commands are only valid when the G.703 option card is installed in the SLM-5650 modem.
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments
for Command
or Response
to Query
Description of Arguments
Response to
Command
Query
(Instruction
Code and
Qualifier)
Response to Query
Tx Ternary
Code
TTC= 1 byte, value
of 0 thru 3
Command or Query.
Tx Ternary Code, where:
0=AMI
1=B8ZS
2=B6ZS
3=HDB3
Example: TTC=3 (Set Tx Ternary Code to HDB3)
TTC=
TTC?
TTC*
TTC#
TTC? TTC=x
(see description of
arguments)
Rx Ternary
Code
RTC= 1 byte, value
of 0 thru 3
Command or Query.
Rx Ternary Code, where:
0=AMI
1=B8ZS
2=B6ZS
3=HDB3
Example: RTC=3 (Set Rx Ternary Code to HDB3)
RTC=
RTC?
RTC*
RTC#
RTC? RTC=x
(see description of
arguments)
Receive T1
Framing
T1F= 1 byte, value
of 0 or 1
Command or Query.
Receive T1 Framing, where:
0=None
1=G.704
Example: T1F=0
T1F=
T1F?
T1F*
T1F#
T1F? T1F=x
(see description of
arguments)
Receive E1
Framing
E1F= 1 byte, value
of 0 or 1
Command or Query.
Receive T1 Framing, where:
0=None
1=G.704
Example: E1F=0
E1F=
E1F?
E1F*
E1F#
E1F? E1F=x
(see description of
arguments)