Filter
Top Products
SLM-5650 Satellite Modem Revision 2
Front Panel Operation MN/SLM5650.IOM
4–20
Select: CONFIG: Remote: Remote: Serial: Interface
If Interface was selected:
Select RS232, RS485-2W (2-wire), or RS485-4W (4-wire), or TTL (Switching)
using the arrow keys, then press [E]. The TTL (Switch) selection enables
interoperation with the CRS-311 (1:1) or CRS-300 (1:N) switch.
IMPORTANT
When selecting RS-232 the local M&C bus address displays, 0000.
Addressing is not supported by RS-232 or TTL (Switch)because they
are not a multi drop communication standards. If RS-485 is selected,
the display will show address 0001. This address can be changed
using the front panel. The most significant digit is for Comtech EF
Data redundancy switches.
Select: CONFIG: Remote: Remote: Serial: Interface: Baudrate
If Baudrate was selected:
IMPORTANT
The only asynchronous character format supported is 8 bits data, No
parity and 1 stop bit.
M&C Bus Interface: RS232 RS485-2W
RS485-4W TTL (Switching) (efE)
Local M&C Bus Address:
0000
Local M&C Bus Baud Rate:
38400 Baud (bcE)