Filter
Top Products
EDS-408A/405A Series User’s Manual Featured Functions
3-9
Time Server IP/Name
Setting Description Factory Default
1st Time Server
IP/Name
IP or Domain address (e.g., 192.168.1.1 or
time.stdtime.gov.tw or time.nist.gov)
2nd Time Server
IP/Name
EDS will try to locate the 2nd NTP Server if
the connection to the 1
st
NTP server failed.
None
Time Server Query Period
Setting Description Factory Default
Query Period
This parameter determines how frequently the
time is updated from the NTP server.
600 seconds
Turbo Ring DIP Switch
EDS-408A/405A series are plug-and-play managed redundant Ethernet switches. The proprietary
Turbo Ring protocol was developed by MOXA to provide better network reliability and faster
recovery time. MOXA Turbo Ring’s recovery time is less than 300 ms—compared to a 3- to
5-minute recovery time for commercial switches—decreasing the possible loss caused by network
failure.
A set of DIP Switches located on EDS-408A/405A’s outer casing can be easily used to configure
the Turbo Ring settings in only a few seconds. Some users may wish to disable the Turbo Ring
DIP Switches to avoid accidental changes to the configuration. To disable the DIP Switches, start
the user interface, and then click on Turbo Ring DIP Switch under Basic Settings. Next, select
the checkmark from the Disable the Turbo Ring DIP Switch checkbox.
Turbo Ring DIP Switch
Setting Description Factory Default
Enable the Turbo
Ring DIP Switch
Unselect the “Disable the Turbo Ring DIP
Switch” option to enable the entire set of
Hardware DIP switches.
Disable the Turbo
Ring DIP Switch
Select the “Disable the Turbo Ring DIP
Switch” option to disable the entire set of
Hardware DIP switches.
Unselect
(Turbo Ring DIP Switch is
enabled)
EDS-408A/405A Series DIP Switches
12
------
MASTER
COUPLER
TURBO
RING
34
The default setting for each DIP Switch is OFF. The following table
explains the effect of setting the DIP Switch to the ON position.