Filter
Top Products
EDS-408A/405A Series User’s Manual Featured Functions
3-45
Desired IP Address
Setting Description Factory Default
IP Address Set the desired IP of connected devices. None
Using Diagnosis
MOXA EtherDevice Switch provides two important tools for administrators to diagnose network
systems.
Mirror Port
The Mirror port function can be used to monitor data being transmitted through a specific port.
This is done by setting up another port (the mirror port) to receive the same data being transmitted
from, or both to and from, the port under observation. This allows the network administrator to
“sniff” the observed port and thus keep tabs on network activity.
Do the following to set up the Mirror Port function:
STEP 1
Configure MOXA EtherDevice Switch’s Mirror Port function from either the Console utility or
Web Browser interface. You will need to configure three settings:
Monitored Port
Select the port number of the port whose network activity will be
monitored.
Mirror Port
Select the port number of the port that will be used to monitor the
activity of the monitored port.
Watch Direction
Select one of the following two watch direction options:
y Output data stream
Select this option to monitor only those data packets being sent out
through MOXA EtherDevice Switch’s port.
y Bi-directional
Select this option to monitor data packets both coming into, and
being sent out through, MOXA EtherDevice Switch’s port.
STEP 2
Be sure to activate your settings before exiting.
• When using the Web Browser interface, activate by clicking the Activate button.
• When using the Console utility, activate by first highlighting the Activate menu option, and
then press Enter. You should receive the Mirror port settings are now active! (Press any
key to continue) message.