Filter
Top Products
UC-7420/7410 User’s Manual Getting Started
2-4
ATTENTION
Serial Console Reminder
Remember to choose VT100 as the terminal type. Use cable CBL-RJ45F9-150, which comes
with UC-7420/7410, to connect to the serial console port.
Telnet Reminder
When connecting to UC-7420/7410 over a LAN, you must configure your PC’s Ethernet IP
address to be on the same subnet as the UC-7420/7410 you wish to contact. If you do not get
connected on the first try, re-check the serial and IP settings, and then unplug and re-plug
UC-7420/7410’s power cord.
SSH Console
UC-7420/7410 supports an SSH Console to offer users with better security options.
Windows Users
Click on the link http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html to download
PuTTY (free software) to set up an SSH console for UC-7420/7410 in a Windows environment.
The following figure shows a simple example of the configuration that is required.