Moxa Technologies UC-7420/7410 Network Card User Manual


 
UC-7420/7410 User’s Manual Introduction
1-2
Overview
UC-7420/7410 RISC-based Communication Platforms are ideal for embedded applications.
UC-7420/7410 has eight RS-232/422/485 serial ports, dual 10/100 Mbps Ethernet ports, a
PCMCIA interface for wireless LAN communication, and CompactFlash and USB port for mass
storage flash disk expansion.
UC-7420/7410 uses an Intel XScale IXP-422 266 Mhz RISC CPU. Unlike the X86 CPU, which
uses a CISC design, the IXP-422’s RISC design architecture and modern semiconductor
technology provide UC-7420/7410 with a powerful computing engine and communication
functions, but without generating a lot of heat. The built-in 32 MB NOR Flash ROM and 128 MB
SDRAM give you enough memory to put your application software directly on UC-7420/7410.
And since the dual LAN ports are built right into the IXP-422 CPU, UC-7420/7410 makes an ideal
communication platform for Network Security applications. If your application requires placing
UC-7420/7410 in a location that is not located near an Ethernet LAN connection, you can use
UC-7420/7410’s PCMCIA port to attach a wireless LAN card.
The pre-installed Linux operating system provides an open software operating system for your
software program development. Software written for desktop PCs can be easily ported to the
UC-7420/7410 platform with a GNU cross compiler, without needing to modify the source code.
All of the necessary device drivers, such as a PCMCIA Wireless LAN module and Keypad, LCM,
and Buzzer control, are also included with UC-7420/7410. The Operating System, device drivers,
and the software you develop for your own application, can all be stored in UC-7420/7410’s Flash
memory.
Package Checklist
UC-7410-LX
RISC-based Universal Communicator with 8 Serial Ports, Dual Ethernet, Linux OS
UC-7420-LX
RISC-based Universal Communicator with 8 Serial Ports, Dual Ethernet, PCMCIA, Compact
Flash, USB, Linux OS
UC-7420/7410 is shipped with the following items:
y UC-7410 or UC-7420
y Wall-Mounting Kit
y DIN-Rail Mounting Kit
y UC-7420/7410 Quick Installation Guide
y UC-7420/7410 Documentation & Software CD
y Cross-over Ethernet cable
y CBL-RJ45M9-150: 150 cm, 8-pin RJ45 to Male DB9 serial port cable
y CBL-RJ45F9-150: 150 cm, 8-pin RJ45 to Female DB9 console port cable
y Power Adaptor
y Product Warranty Booklet
NOTE: Notify your sales representative if any of the above items is missing or damaged.
Product Features
y Intel XScale IXP-422 266 MHz Processor
y On-board 128 MB RAM, 32 MB Flash ROM
y Eight RS-232/422/485 serial ports
y Dual 10/100 Mbps Ethernet