Filter
Top Products
CX-MB-EVA2 User's Manual Hardware
31
4.9.2 HDA codec
Specification:
References: X39
Connector: Foxconn JAS331-H1G2-4F
Pinout: Refer to Table 12
Con colour Function
1 light blue
Line In
2 lime Line Out
3 pink Mikrofon
4 orange Center / LFE
5 black Surround
6 grey Side
Table 17 Pinout LineOut
4.10 IDE Interface
A standard IDE interface is provided according to ATA/ATAPI, with the controller
supporting at least Ultra-ATA100 with 100 MB/sec data rate. The transfer mode that can
be selected depends on the cable used and which modes are supported by the drives.
Using a ATA100 cable on X22, avoid a master slave combination with X23 or X24.
4.10.1 Primary IDE Channel
4.10.1.1.1 40-pin IDE interface
A 40-pin IDC connector is provided at the primary IDE channel for standard IDE drives.
Specification:
References: X22
Connector: FCI 75869-118
Pinout: Refer to Specification ATA/ATAPI-6 [6, page 400, Table A3]
4.10.1.1.2 44-pin IDE Interface
For connection of 2.5” hard disks, a 44-pin IDC connector is provided at the primary IDE
channel.
Specification:
References: X23
Connector: Yamaichi ZP7-44-S-G
Pinout: Refer to Specification ATA/ATAPI-6 [6, page 412, Table A16]