Filter
Top Products
CX-MB-EVA2 User's Manual Hardware
43
4.28 Miscellaneous
4.28.1 Resistors for current measuring
Resistors are inserted into the power supply lines of the COM Express module, the PCI
express graphics slot as well as into every PCI slot and one PCI express x1 slot. These
can be used for current measurement.
In addition to there is one jumper to measure the current using an external wire loop and
clamp meter.
4.28.2 Ground Pins
There are several ground pins spread over the base board for connection of
measurement equipment.
4.28.3 Sleep State LED Display
The MSC CX-MB EVA2 has 3 LEDs to display the SleepStates.
LED1201 displays status S3.
LED1202 displays status S4.
LED1203 displays status S5.