Filter
Top Products
CX-MB-EVA2 User's Manual Hardware
32
4.10.1.1.3 Compact Flash Interface
A socket for compact flash cards, type I/II, is provided at the primary IDE channel.
The compact flash interface supports True IDE mode according to compact flash
specification rev. 3.0.
Inter alia the compact flash specification rev. 3.0 supports the UDMA mode.
Specification:
References: X24
Connector: Yamaichi CF050P2-003-10-D2
Pinout: Refer to specification "CF+ & CF specification rev. 3.0"
[7, page 24, table 4]
4.11 SATA-Interface
Up to four SATA drives can be connected to the SATA interfaces.
Note : Depending on the COM Express module used, not all SATA ports are available.
Every SATA signal connector has its own power supply connector.
SATA Channel References
SATA 0 X25
SATA 1 X26
SATA 2 X27
SATA 3 X28
Table 18 Assignment SATA Channel to Connector Reference
Specification SATA signal connector:
References: X25 - X28
Connector: Molex 87713 series
Pinout: Refer to Specification SATA
[8, page 46, table 3]
Specification Power Supply:
References: X49 - X52
Connector: AMP 171825-4
Pinout: Refer to ATX specification V2.2
[2, "Floppy Drive Power Connector"]