Filter
Top Products
18
Dual Ethernet ProxyServer User Guide
Loading Your Software
The following loading procedure does not provide every screen or option in the process of
installing the Firewall software. The assumption is that the installation is being performed by a
technical person with a thorough knowledge of Windows and the software loading process.
Additional information on the Firewall software is provided in the Chapter 4, and in the on-line
help provided with your Firewall software.
1. Run Windows on the PC connected to the Command Port.
2. Insert the ProxyServer diskette labeled
Disk 1
into the disk drive on the PC connected to
the Command port.
3. Win3.1 users - In Program Manager click File | Run. In the Run dialog box, type
a:\setup or b:\setup (depending on the location of your floppy disk drive) in the
Command Line field and then click OK.
Win95 users - click Start | Run. In the Run dialog box click on the down arrow and
choose a:\setup or b:\setup (depending on the location of your floppy disk drive) in the
Command Line field and then click OK.
4. Follow the on-screen instructions to install your Firewall software.