Filter
Top Products
13
Chapter 2—Hardware Installation
4. To avoid damaging the ISI5634PCI card and your PC, make sure
your computer and any peripheral equipment connected to it are
turned off. The ISI5634PCI can be installed in any Pentium
equivalent PCI bus computer.
5. Remove the cover of your computer as instructed in your
computers documentation.
6. Locate the unused PCI slot you will be using for your ISI5634PCI
card and remove the slot cover according to instructions in your
computers documentation.
7. Install the ISI5634PCI card into the selected expansion slot in the
same manner as any other add-on card, as instructed in your
computers documentation.
8. Fasten the retaining bracket to computer chassis and replace
cover.
9. Plug one end of the phone cable into each modems LINE jack and
the other end into a phone line wall jack.
There are 8 phone line receptacles on the ISI5634PCI-4, as well as
8 phone line receptacles on the ISI5634PCI-8. However, only four
of these receptacles are functional on the ISI5634PCI-4 card.
When connecting phone lines to the ISI5634PCI-4, be sure to use
the first four receptacles on ISI5634PCI-4 card, starting at the edge
of the board with the screw-hole for attaching the card to the
computer chassis.
Note: The LINE jack is not interchangeable with the wall jack.
Do not plug the phone into the LINE jack or the line cable into
the wall jack.
Note: The Federal Communications Commission (FCC) and
Industry Canada impose certain restrictions on equipment
connected to public telephone systems. See Appendix A
Regulatory Information for more information.
10. Turn on the power to the computer. You now are ready to install
the software/drivers.