Multi-Tech Systems MVPFXS-24 Network Card User Manual


 
Phone/IP Starter Config. MultiVOIP FX Quick Start Guide
24
12. Allow the voip to boot up again normally (this will take a few minutes) with the console connection still
active. When the rebooting process is complete (when the boot light is no longer lit), type 1 and press
Enter.
NOTE: This change of IP address is only temporary. You must complete this procedure to make the
change of IP address permanent.
13. Use a web browser to browse to the voip using the IP address that you have just assigned.
14. In the web browser, click on IP Parameters in the sidebar list.