Filter
Top Products
A - 16
TM
APP. A
STAR …
CODES (HEX/CONTROL) : 1B 50 / <ESC> “P”
FUNCTION : Select 12 CPI character size
APPLICATION LIMIT : This code is valid only when received at the
beginning of a line.
DETAIL DESCRIPTION : 12 CPI is selected. The maximum number of
print columns is set by DIP switch 2-5 (paper width setting) as follows
DIP sw 2-5 ON OFF
Paper width setting (inch) 3.25/3.0 2.25
Maximum no. of print columns 33 23
CODES (HEX/CONTROL) : 1B 51 n / <ESC> “Q” n
FUNCTION : Set right margin
DEFINITION RANGE : 2
≤
n
≤
(maximum no. of print columns)
DETAIL DESCRIPTION : Sets the right margin at column n in the
current character pitch. Column n becomes the last character position of the line.
The right margin does not move if the character pitch is changed later. The right
margin must be within the limits above.
CODES (HEX/CONTROL) : 1B 52 n / <ESC> “R” n
FUNCTION : Select international character set
DEFINITION RANGE : 00H
≤
n
≤
0AH
DETAIL DESCRIPTION : Selects the international character set
corresponding to the value of n.
n = Country n = Country n = Country
00H U.S.A. 04H Denmark 08H Japan
01H France 05H Sweden 09H Norway
02H Germany 06H Italy 0AH Denmark II
03H England 07H Spain 0BH Croatian
The default international characters can also be set with DIP switches, however,
setting by control code takes priority over setting by DIP switches.