Filter
Top Products
1.
In case of connecting the WTS through LAN:
Connect the eClient 630LT-GR/630LT-GR-N to the network with an
Ethernet cable.
In case of a dial-up or dial-in connection:
Connect the eClient 630LT-GR/630LT-GR-N to a modem or a
modem card.
NOTE
• Please remove the lid on the side of the 630LT-GR/630LT-GR-N before
connecting a LAN card or a modem card.
2.
Plug a keyboard and a mouse into the eClient 630LT-GR/630LT-GR-
N. If using other devices, please connect them to the appropriate
connectors.
In use of a stylus or a finger as an input device, it is not necessary to connect a
mouse.
3.
If using other devices, please connect them to the appropriate
connectors.
4.
Plug the power cord into the power connector.
WARNING
Use the enclosed power cord and connect to the standard
power outlet of your country.
Be sure to remain within the rated voltage of the power cord.
Not doing so may result in fire or electric shock.
The equipment must be connected to a grounded main
outlet.
Not doing so may result in fire or electric shock.
10
2. CONNECTING THE eClient 630LT-GR/630LT-GR-N