Filter
Top Products
eClient 630LT-GR/630LT-GR-N Settings
Please confirm the following settings in the [Control Panel] tab of [Terminal Properties].
[Network and Dial-up Connections] tab
- In case of the connection to the WTS/Web server through built-in LAN
• IP address setting
selecting of [Obtain an IP address via DHCP]
- In case of the connection with a LAN card
• IP address setting
selecting of [Specify an IP address] and typing “255.255.255.255”.
[DHCP Settings]
- [General] tab
: Specifying the [Target Adapter] (Built-in LAN or LAN card) [DHCP Options] tab
- [DHCP Options] tab
: Selecting [Enable DHCP Options] and typing each option number settings.
NOTE
• If the DHCP Option is used to setup the eClient 630LT-GR/630LT-GR-N for the
first time, “Terminal Connection Manager” will appear because the unit
automatically receives information from the DHCP Server. (“eClient Setup
Wizard will not be displayed.)
• If the DHCP Option is set once and needs to be canceled, please change the
key of the DHCP Server. Even if changing the DHCP Option in the eClient
630LT-GR/630LT-GR-N, the DHCP Server will overwrite the option next time
the unit is restarted, and the changes in the eClient 630LT-GR/630LT-GR-N will
not be effective.
8. PRACTICAL SETUP
59