Filter
Top Products
20
Chapter 2 Adjusting Screen
2-4. Color Adjustment
●
To select the display mode (Color Mode)
Color Mode allows you to select easily the adequate mode suitable for the monitor’s application.
Color Mode
Mode Purpose
1-Custom
Available for the color settings according to your preference.
2-Adobe
®
RGB
Suitable for color matching with
Adobe
®
RGB
compatible peripherals.
3-sRGB
Suitable for color matching with sRGB compatible peripherals.
4-EBU
Suitable for reproducing the color gamut and gamma as set forth by EBU (European
Broadcasting Union) standards.
5-REC709
Suitable for reproducing the color gamut and gamma as set forth by the ITU-R Rec. 709
standard.
6-SMPTE-C
Suitable for reproducing the color gamut and gamma as set forth by SMPTE-C stan-
dards.
7-DCI
Suitable for reproducing the color gamut and gamma as set forth by DCI standards.
8-CAL1
9-CAL2
10-CAL3
Displays the screen adjusted by calibration software.
Attention
• “CAL” mode can be adjusted by using the calibration software “ColorNavigator” and SelfCalibration (page 32).
• With default settings only one CAL mode can be selected for every input signal displayed.
• A CAL mode will be chosen by the ColorNavigator in accordance with the displayed input signal.
• Avoid operating any funciton of the monitor while using ColorNavigator.
The mode menu
appears.
Procedure
1. Press .
Mode menu appears at the lower left of the screen.
2. The mode among the list is highlighted in turn each time is pressed.
You can switch the current mode with or while the mode menu is being displayed.
Custom←→Adobe
®
RGB←→sRGB←→EBU←→REC709
CAL3←→CAL2←→CAL1←→DCI←→SMPTE-C
NOTE
• The Adjustment menu and the Mode menu cannot be displayed at the same time.
• You can disable a specic mode to be selected. For more information, refer to “3-1. Enabling/Disabling Mode
Selection [Mode Preset]” (page 27).