Filter
Top Products
Index
© National Instruments Corp. Index-15 NI-488.2 User Manual for Windows
S
secondary GPIB address
definition, 1-2
setting, 8-7
Send routine
configuring instruments, 3-15
using in wibic, 5-13
SendCmds function, 7-2
SendIFC routine, 3-13
SendList routine, 5-12
serial polling, 7-5 to 7-10
application example using NI-488.2 routines, 2-16 to 2-17
automatic serial polling, 7-6 to 7-7
autopolling and interrupts, 7-7
enabling, 8-9
stuck SRQ state, 7-6 to 7-7
service requests
from IEEE 488 devices, 7-5
from IEEE 488.2 devices, 7-6
setting timeout value, 8-8
SRQ and serial polling
with NI-488 device functions, 7-7 to 7-8
with NI-488.2 routines, 7-8 to 7-10
service requests. See also SRQ (service request) line.
application examples, 2-10 to 2-13
serial polling
IEEE 488 devices, 7-5
IEEE 488.2 devices, 7-6
stuck SRQ state, 7-6 to 7-7
Talker/Listener applications, 7-4
set command, 5-13
Set (select device or board) function, 5-15
setting up your system. See configuration.
setup utility, 1-6
software. See NI-488.2 software.
SPOLL status word condition
bit position, hex value, and type (table), 3-4
description, A-3
SRQ (service request) line. See also service requests.
purpose (table), 1-3
serial polling
using NI-488 device functions, 7-7 to 7-8
using NI-488.2 routines, 7-8 to 7-10
stuck SRQ state, 7-6 to 7-7
SRQI status word condition
bit position, hex value, and type (table), 3-4
description, A-2